Measurement equipment list
| 設備名稱 | Equipment name | 品名 / Brand name | 數量/Qty | 產地 | Made in |
| 三座標 | CMM | ?？怂箍?/ Hexagon | 4 | 瑞典 | Sweden |
| 影像檢測儀 | 2D auto inspection | 萬豪 / WANHAO | 2 | 臺灣 | TaiWan |
| 高度計 | Height gauge | TESA | 4 | 瑞典 | Sweden |
| 千分尺/卡尺 | Micrometre/Caliper | 三豐 / Mitutoyo | 50 | 日本 | Japan |
| 粗糙度儀 | Roughness Tester | 三豐 / Mitutoyo | 1 | 日本 | Japan |
| 顯微鏡 | Microscope | 尼康 / Nikon | 25 | 日本 | Japan |
| 韋氏硬度計 | Hardness Tester(HW) | 天星/TianXin | 1 | 中國 | China |
| 洛氏硬度計 | Hardness Tester(HRC) | 得川/DeChuang | 1 | 中國 | China |
| 維氏硬度計 | Hardness Tester(HV) | 聯爾/HV-1000 | 1 | 中國 | China |
| 邵氏硬度計D型 | Shore durometer(HD) | 山度/LX-D-2 | 1 | 中國 | China |
| 二維碼檢查儀 | 2D bar code tester | 基恩士 / KEYENCE SR-1000 | 1 | 日本 | Japan |
| 高斯計 | Gauss meter | 亨通/HT20 | 1 | 中國 | China |
| 數顯式推拉力計 | Digital Push & Pull Tester | 愛德堡/HP-50 | 1 | 中國 | China |
| 表盤式推拉力計 | Dial push-pull meter | 愛德堡/NK-500 | 1 | 中國 | China |
| 色差儀 | colorimeter | 三恩時3nh/NR10QC | 1 | 中國 | China |
| 表面電阻測試儀 | Surface resistance tester | 驛生勝利/VICTOR 385 | 1 | 中國 | China |
| 數顯磁導率儀 | Magnet permeability meter | 李斯特/Ferromaster | 1 | 德國 | Germany |
| 鍍層膜厚儀 | Film thickness gauge | 里博/LT200TX-GX | 1 | 中國 | China |
| 高溫爐 | High temp. furnace | 中達電爐 / ZhongDa | 1 | 中國 | China |
| 設備名稱/Equipment name | 三座標 /CMM |
| 品名 / Brand name | ?？怂箍?/ Hexagon |
| 數量/Qty | 4 |
| 產地 /Made in | 瑞典 /Sweden |
| 設備名稱/Equipment name | 影像檢測儀 /D auto inspection |
| 品名 / Brand name | 萬豪 / WANHAO |
| 數量/Qty | 2 |
| 產地 /Made in | 臺灣 /TaiWan |
| 設備名稱/Equipment name | 高度計 /Height gauge |
| 品名 / Brand name | TESA |
| 數量/Qty | 4 |
| 產地 /Made in | 瑞典 /Sweden |
| 設備名稱/Equipment name | 千分尺/卡尺 /Micrometre/Caliper |
| 品名 / Brand name | 三豐 / Mitutoyo |
| 數量/Qty | 50 |
| 產地 /Made in | 日本 /Japan |
| 設備名稱/Equipment name | 粗糙度儀 /Roughness Tester |
| 品名 / Brand name | 三豐 / Mitutoyo |
| 數量/Qty | 1 |
| 產地 /Made in | 日本 /Japan |
| 設備名稱/Equipment name | 顯微鏡 /Microscope |
| 品名 / Brand name | 尼康 / Nikon |
| 數量/Qty | 25 |
| 產地 /Made in | 日本 /Japan |
| 設備名稱/Equipment name | 韋氏硬度計 /Hardness Tester(HW) |
| 品名 / Brand name | 天星 / TianXin |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 洛氏硬度計 /Hardness Tester(HRC) |
| 品名 / Brand name | 得川 / DeChuang |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 維氏硬度計 /Hardness Tester(HV) |
| 品名 / Brand name | 聯爾 /HV-1000 |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 邵氏硬度計D型 /Shore durometer(HD) |
| 品名 / Brand name | 山度 /LX-D-2 |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 二維碼檢查儀 /2D bar code tester |
| 品名 / Brand name | 基恩士 / KEYENCE SR-1000 |
| 數量/Qty | 1 |
| 產地 /Made in | 日本 /Japan |
| 設備名稱/Equipment name | 高斯計 /Gauss meter |
| 品名 / Brand name | 亨通 /HT2 |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 數顯式推拉力計 /Digital Push & Pull Tester |
| 品名 / Brand name | 愛德堡 /HP-50 |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 表盤式推拉力計 /Dial push-pull meter |
| 品名 / Brand name | 愛德堡 /NK-500 |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 色差儀 /colorimeter |
| 品名 / Brand name | 三恩時3nh /NR10QC |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 表面電阻測試儀 /Surface resistance tester |
| 品名 / Brand name | 驛生勝利 /VICTOR 385 |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 數顯磁導率儀 /Magnet permeability meter |
| 品名 / Brand name | 李斯特 /Ferromaster |
| 數量/Qty | 1 |
| 產地 /Made in | 德國 /Germany |
| 設備名稱/Equipment name | 鍍層膜厚儀 /Film thickness gauge |
| 品名 / Brand name | 里博 /LT200TX-GX |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
| 設備名稱/Equipment name | 高溫爐 /High temp. furnace |
| 品名 / Brand name | 中達電爐 /ZhongDa |
| 數量/Qty | 1 |
| 產地 /Made in | 中國 /China |
Measurement equipment introduction
|
三座標 三座標 CMM 離線3D編程，自動快速檢測產品線性尺寸、幾何公差、自動生成報告等 |
Three coordinate CMM Offline 3D programming, automatic and rapid detection of product linear dimension, geometric tolerance, automatic generation of report, etc. |
|
|
二次元 NCMM 自動檢測平面尺寸及公差，特別適用于薄壁件。 |
Quadratic detector ncmm :Automatic detection of plane dimensions and tolerances, especially for thin-walled parts. |
|
|
TESA 高度計 用于工序中手動快速檢測線性尺寸。 |
TESA altimeter It is used for manual and rapid detection of linear dimensions in the process. |
|
|
千分尺/卡尺 用于工序中手動快速檢測線性尺寸。 |
Micrometer / caliper It is used for manual and rapid detection of linear dimensions in the process. |
|
|
粗糙度儀 高精度感應，精確檢測表面光潔度。 |
Roughness tester High precision induction, accurate detection of surface finish. |
|
|
顯微鏡 卓越的光學性能，最大可放大至50倍。 |
Microscope Excellent optical performance, up to 50 times magnification. |
|
|
韋氏硬度計 鋁合金專用硬度計，非常適于在生產現場對材料進行快速硬度檢測。 |
Vickers hardness tester The special hardness tester for aluminum alloy is very suitable for rapid hardness testing of materials on the production site. |
|
|
洛氏硬度計 用于現場精確測熱處理后、淬火后的高硬度材料硬度。 |
Rockwell hardness tester It is used to accurately measure high hardness materials after heat treatment and quenching on site. |
|
|
維氏硬度計 廣泛應用于測定微小、薄壁件、表面鍍層硬度。 |
Vickers hardness tester It is widely used to measure the hardness of micro, thin-walled parts and surface coatings. |
|
|
邵氏硬度計D型 硬橡膠、樹脂、壓克力、玻璃、熱塑性橡膠、印刷板、纖維等。 |
Shore hardness tester type D Hard rubber, resin, acrylic, glass, thermoplastic rubber, printing board, fiber, etc. |
|
|
二維碼檢查儀 可檢精確測出二維碼的識別等級。 |
QR code checker It can detect and accurately measure the identification level of QR code. |
|
|
高斯計 檢測出永磁體表面磁場強度。 |
Gauss meter The surface magnetic field strength of the permanent magnet is detected. |
|
|
數顯式推拉力計 又名微型壓力儀最大只能承受5kg的推拉力，適用于小型彈簧、彈片的拉力測試。 |
Digital display push-pull meter Also known as micro pressure gauge, it can only bear 5kg push and pull force at most. It is suitable for the tension test of small springs and shrapnel. |
|
|
表盤式推拉力計 最大可以承受50kg的推拉力，適用于膠水附著力、銷釘裝配力、大彈簧的推拉力等。 |
Dial push-pull meter It can bear the maximum pushing and pulling force of 50kg, which is suitable for glue adhesion, pin assembly force, pushing and pulling force of large spring, etc. |
|
|
色差儀 標準色和樣品色差數值數據分析，更直觀的表現出顏色差異。 |
colorimeter The analysis of numerical data of standard color and sample color difference shows the color difference more intuitively. |
|
|
表面電阻測試儀 用于量化測量所有導電型、抗靜電及靜電泄放材料的表面電阻或系統電阻。 |
Surface resistance tester It is used to measure the electrostatic resistance and discharge resistance of all conductive materials. |
|
|
數顯磁導率儀 測量具有低磁導率的材料和工件，如SUS316L。 |
Digital permeability meter Measure materials and workpieces with low permeability, such as SUS316L. |
|
|
鍍層膜厚儀 用來專業測量電鍍、陽極鍍層厚度的標準儀器。 |
Coating thickness gauge instrument for professional measurement of electroplating and anode coating thickness. |
|
|
高溫爐 測試材料、工件、膠水、磁鐵等的耐高溫特性。 |
High temperature furnace Test the high temperature resistance of materials, workpieces, glues, magnets, etc. |
|
|
三座標 三座標 CMM 離線3D編程，自動快速檢測產品線性尺寸、幾何公差、自動生成報告等 |
|
Three coordinate CMM Offline 3D programming, automatic and rapid detection of product linear dimension, geometric tolerance, automatic generation of report, etc. |
|
二次元 NCMM 自動檢測平面尺寸及公差，特別適用于薄壁件。 |
|
Quadratic detector ncmm :Automatic detection of plane dimensions and tolerances, especially for thin-walled parts. |
|
TESA 高度計 用于工序中手動快速檢測線性尺寸。 |
|
TESA altimeter It is used for manual and rapid detection of linear dimensions in the process. |
|
千分尺/卡尺 用于工序中手動快速檢測線性尺寸。 |
|
Micrometer / caliper It is used for manual and rapid detection of linear dimensions in the process. |
|
粗糙度儀 高精度感應，精確檢測表面光潔度。 |
|
Roughness tester High precision induction, accurate detection of surface finish. |
|
顯微鏡 卓越的光學性能，最大可放大至50倍。 |
|
Microscope Excellent optical performance, up to 50 times magnification. |
|
韋氏硬度計 鋁合金專用硬度計，非常適于在生產現場對材料進行快速硬度檢測。 |
|
Vickers hardness tester The special hardness tester for aluminum alloy is very suitable for rapid hardness testing of materials on the production site. |
|
洛氏硬度計 用于現場精確測熱處理后、淬火后的高硬度材料硬度。 |
|
Rockwell hardness tester It is used to accurately measure high hardness materials after heat treatment and quenching on site. |
|
維氏硬度計 廣泛應用于測定微小、薄壁件、表面鍍層硬度。 |
|
Vickers hardness tester It is widely used to measure the hardness of micro, thin-walled parts and surface coatings. |
|
邵氏硬度計D型 硬橡膠、樹脂、壓克力、玻璃、熱塑性橡膠、印刷板、纖維等。 |
|
Shore hardness tester type D Hard rubber, resin, acrylic, glass, thermoplastic rubber, printing board, fiber, etc. |
|
二維碼檢查儀 可檢精確測出二維碼的識別等級。 |
|
QR code checker It can detect and accurately measure the identification level of QR code. |
|
高斯計 檢測出永磁體表面磁場強度。 |
|
Gauss meter The surface magnetic field strength of the permanent magnet is detected. |
|
數顯式推拉力計 又名微型壓力儀最大只能承受5kg的推拉力，適用于小型彈簧、彈片的拉力測試。 |
|
Digital display push-pull meter Also known as micro pressure gauge, it can only bear 5kg push and pull force at most. It is suitable for the tension test of small springs and shrapnel. |
|
表盤式推拉力計 最大可以承受50kg的推拉力，適用于膠水附著力、銷釘裝配力、大彈簧的推拉力等。 |
|
Dial push-pull meter It can bear the maximum pushing and pulling force of 50kg, which is suitable for glue adhesion, pin assembly force, pushing and pulling force of large spring, etc. |
|
色差儀 標準色和樣品色差數值數據分析，更直觀的表現出顏色差異。 |
|
colorimeter The analysis of numerical data of standard color and sample color difference shows the color difference more intuitively. |
|
表面電阻測試儀 用于量化測量所有導電型、抗靜電及靜電泄放材料的表面電阻或系統電阻。 |
|
Surface resistance tester It is used to measure the electrostatic resistance and discharge resistance of all conductive materials. |
|
數顯磁導率儀 測量具有低磁導率的材料和工件，如SUS316L。 |
|
Digital permeability meter Measure materials and workpieces with low permeability, such as SUS316L. |
|
鍍層膜厚儀 用來專業測量電鍍、陽極鍍層厚度的標準儀器。 |
|
Coating thickness gauge instrument for professional measurement of electroplating and anode coating thickness. |
|
高溫爐 測試材料、工件、膠水、磁鐵等的耐高溫特性。 |
|
High temperature furnace Test the high temperature resistance of materials, workpieces, glues, magnets, etc. |